Technology Groups

Discuss how to reduce the complexity of network security in a borderless enterprise, without sacrificing effectiveness or performance, by using Enterprise Firewalls to integrate your environment.
* This is a PUBLIC forum. Do not disclose any private information here. 

Latest Discussions

  • Profile Picture

    RE: Reg Gui Access

    Posted in: Firewall

    Hi, I got your point. Configure LAN to LAN Firewall rule. It will resolve the issue. ------------------------------ Deepak Kumar First Option General Trading LLC Dubai ------------------------------

  • Profile Picture

    VXLAN with Multiple Subnets

    Posted in: Firewall

    Hi, i have a setup for a Customer comprising of two Sites Site A : HQ Site B : DR we are planning to use VXLAN over IPSec VPN to Extend few subnets to DR. Subnets 192.168.1.x/24 and 192.168.12.x/24 has to be extended using VXLAN. i have tested VXLAN ...

  • Posted in: Firewall

    Dear, I have done a setup for a device with 7 internet connections managed under SDWAN. SDWAN is a very useful feature Regards Rony ------------------------------ Rony Moussa Fortinet NSE Certified: Level 8 ------------------------------

  • Profile Picture

    RE: Routing Traffic through SD-WAN

    Posted in: Firewall

    SDWAN rules are the solution, you can specify policy routes based on applications to achieve your needs. Regards Rony ------------------------------ Rony Moussa Fortinet NSE Certified: Level 8 ------------------------------

  • Posted in: Firewall

    Hi, You can create an NAT IP Pool. "Policy & Object" >>IP Pool >> Select NAT Type and provide the public IP address to be NAT. The in you IPv4 policy select the NAT Pool you created for NAT option. All the traffic under the policy will use the NAT IP ...

  • Profile Picture

    RE: Policy Routing Question

    Posted in: Firewall

    Please check out the below link for full details. https://kb.fortinet.com/kb/viewContent.do?externalId=FD31240

    1 person recommends this.
  • Posted in: Firewall

    You can add any number of internet connection. If you have used up WAN ports you can connect it on LAN ports. The you can enable ECMP for load balancing. ------------------------------ Kirthy ------------------------------

  • Posted in: Firewall

    Hi, The IP address of the github will change. The following is the capture of one of the destination addresses.What problems can find? I tested Baidu.Cloud_File.download and upload to be well recognized and can prevent upload actions. I feel that application ...

  • Profile Picture

    RE: SD WAN and NAT Problem

    Posted in: Firewall

    Hi Rony, Thank you. I test link monitor, it can solve my problem on SDWAN and NAT problem. Now I have a new problem. I use fortigate 200E with firmware v6.0.1 build0131 (GA) to test. By default all traffic go through port13, I use policy route to force ...

  • Profile Picture

    RE: FG301E IPS mode

    Posted in: Firewall

    Hi Deepak, Thank you for your comment and yes fail-open same as bypass traffic without inspect in case of failing. For context mode it is possible assign more than one interface for each context even if are working in cluster mode? I have ...