Topic Thread

Expand all | Collapse all

MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

  • 1.  MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

    Posted 18 days ago
    Hello, i have a Meru 4200 with a corrupted SD Card. i am using AP320i access points. i am looking for a copy of the firmware and a copy of System Director. If someone can point me in the right direction. Thanks,

    ------------------------------
    James
    ------------------------------


  • 2.  RE: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

    Posted 17 days ago
    Edited by John Battam 17 days ago
    Hi James,

    What System Director version did you need? Depending on how corrupt it is you make need to remove the compact flash card,  re-image it using WinImage + a controller image file. you have a backup or can reconfigure it.

    Kind Regards,
    John


    ------------------------------
    John
    CSE - Wireless APAC
    Fortinet
    Sydney | Australia
    CWNE #327
    ------------------------------



  • 3.  RE: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

    Posted 17 days ago

    Hi John,

    My MC4200 stopped working and I have an yellow LED next to HDD on the face of the unit. So i am guessing the memory card went belly up.
    I am not sure which version of system director I need, I am using AP320s with the MC4200 so what ever version would work best with these APs.

    i dont have a backup, so i will try to reconfigure once i get it restarted.

    Thanks for the quick reponse.



    ------------------------------
    James
    ------------------------------



  • 4.  RE: MC4200 with a Corrupted SD Card. Anyone have a copy of the firmware?

    Posted 17 days ago
    Edited by John Battam 17 days ago
    Hi James,

    No worries, please download the image file below via the Fortinet Egnyte link. It's the latest MC4200 image compatible with the AP320 being SD 7.0-13.
    You'll need to open up the MC4200, remove the compact flash card, connect it to your PC and use an imaging tool, such as Win-Image to load the image file onto the compact flash card.
    Once complete, you can then put the card back into the MC4200 and it should boot up ok. Then run setup via CLI etc.

    meru-7.0-13build-0-MC4200.img
    Password: z2jU39hS
    https://fortinet.egnyte.com/dl/LSj9kKJeHh

    Kind Regards,

    ------------------------------
    John
    CSE - Wireless APAC
    Fortinet
    Sydney | Australia
    CWNE #327
    ------------------------------