Topic Thread

No Traffic or Traffic terminating to wrong interface - Route based IPSec VPN

  • 1.  No Traffic or Traffic terminating to wrong interface - Route based IPSec VPN

    Posted Jun 01, 2017 01:28 AM

    Hello,

    I am facing a route issue in a site to site ipsec vpn which branch subnet connects remote subnet over 4G connection.  Its a route based vpn, and configured a static route to remote subnet through vpn interface as well as the policy also set for local to remote and vice versa.  But when debug, the traffic is not redirecting to VPN interface.

     

    2017-06-01 13:58:21 id=20085 trace_id=362 func=resolve_ip_tuple_fast line=4781 msg="Find an existing session, id-00000601, original direction"
    2017-06-01 13:58:21 id=20085 trace_id=362 func=ipv4_fast_cb line=53 msg="enter fast path"
    2017-06-01 13:58:21 id=20085 trace_id=362 func=ipsecdev_hard_start_xmit line=157 msg="enter IPsec interface-SaadVPN"
    2017-06-01 13:58:21 id=20085 trace_id=362 func=esp_output4 line=846 msg="IPsec encrypt/auth"
    2017-06-01 13:58:21 id=20085 trace_id=362 func=ipsec_output_finish line=496 msg="send to 10.229.102.2 via intf-wwan"
    2017-06-01 13:58:26 id=20085 trace_id=363 func=print_pkt_detail line=4717 msg="vd-root received a packet(proto=1, 10.57.120.2:1->10.2.10.1:8) from internal. code=8, type=0, id=1, seq=12190."

    plz help me to resolve this issue.

    Device : FortifWiFi 30E -3G4G

    Firmware : v5.4.0 build 5427