Topic Thread

Next Generation Firewall (NGFW)

 View Only
Expand all | Collapse all

Freepbx Fortiguard 200e - Anyone get this working?

  • 1.  Freepbx Fortiguard 200e - Anyone get this working?

    Posted 08-14-2018 14:43
    I've got a Fortiguard 200e with v6.0.1 and I'm trying to get a FreePBX server on the LAN port to work. I'm unable to receive incoming calls. My SIP provider indicates that when they send a call our way, our server is unresponsive. We are running FreePBX v13.0.195.4. I'm able to make outgoing calls without issue. 

    I've setup two IPV4 policies as follows:
    Incoming Interface: WAN
    Source Address: All
    Outgoing Interface: LAN
    Destination Address: Address object (10.0.1.26)
    Service: SIP (TCP 5060-50601)

    Incoming Interface: WAN
    Source Address: ALL
    Outgoing Interface: LAN
    Destination Address: Address object (10.0.1.26)
    Service: Custom (UDP 10000-20000)​

    Has anyone been able to get a FreePBX server working with Fortiguard? So far I'd have to say no but I've got my fingers crossed.

    ------------------------------
    Todd [LastName] [Designation]
    IT Manager
    [CompanyName]
    [City] [State]
    [Phone]
    ------------------------------


  • 2.  RE: Freepbx Fortiguard 200e - Anyone get this working?

    Posted 08-14-2018 15:49

    Did you setup a VIP for the inbound NAT setup? 

    Using virtual IPs to configure port forwarding - Fortinet Cookbook

    Fortinet Cookbook remove preview
    Using virtual IPs to configure port forwarding - Fortinet Cookbook
    This recipe demonstrates how to use Virtual IPs (VIPs) to configure port forwarding on a FortiGate unit. This configuration allows users on the Internet to connect to your server protected behind a FortiGate firewall, without knowing the server's internal IP address and only through ports that you choose.
    View this on Fortinet Cookbook >





    ------------------------------
    Peter [LastName] [Designation]
    Enterprise Engineer, Networking
    [CompanyName]
    [City] [State]
    [Phone]
    ------------------------------



  • 3.  RE: Freepbx Fortiguard 200e - Anyone get this working?

    Posted 08-15-2018 09:43
    Apparently we didn't need the NAT settings. We only needed the port forwards. Once we got that figured out, it all works.

    ------------------------------
    Todd [LastName] [Designation]
    IT Manager
    [CompanyName]
    [City] [State]
    [Phone]
    ------------------------------