Skip to main content (Press Enter).
Skip auxiliary navigation (Press Enter).
Skip main navigation (Press Enter).
on this day
between these dates
Local User Groups
Special Interest Groups
Become a Volunteer
Get NSE Certified
Next Generation Firewall (NGFW)
Back to discussions
Thread closed by the administrator. It is viewable, but not accepting new replies.
Posted Oct 17, 2018 06:40 AM
view attached (3)
No replies, thread closed.
I am trying to build ADVPN in my lab setup . overlay network I am running iBGP.
- with out this command my peering is not working with the branches , although vpn is coming up.
BGP neighbourship works fine.
BGP routing works fine ( Hub and Spokes, I can see the routes getting populated in routing table)
Policies are in place to allow to and from the Spokes and Hub.
Albeit , VPN and overlay routing works fine , traffic flow is not happening ( host to host communication doesnt flow)
Shortcut command is not working ( it is not available at all)
I am attaching my configuration ( Hub and Spoke)and diagram herewith for the reference
Please assist to find the issue
Parvees [LastName] [Designation]
Head of Network and Security
Reason for Moderation
Describe the reason this content should be moderated (required)
NOTE: This post has an associated attachment. Until approval, both the post and the attachment will not be viewable to others.
New Best Answer
This thread already has a best answer. Would you like to mark this message as the new best answer?
Powered by Higher Logic