Netflow is UDP.
Try other diagnostic command like described on the KB.
[cid:
image002.png@...]
http://www.amsinetworks.comAndre Silva -
andre@...<
andre@...Direto: +55 (21) 3500 8100
RJ: +55 (21) 2223 6446 - SP: +55 (11) 2824 6114
Skype:andre_ams
US/CA: +1 (604) 500 2170
Videoconferencia – Clique Aqui
https://portal.starleaf.com/webrtc?target=andre%40amsi.com.brFrom: Paul Ammann via Firewall: [
firewall@...Sent: March 16, 2018 9:03 AM
To:
firewall@...Subject: [Firewall:] - Enabling Netflow
I've been trying to enable Netflow on a firewall and I'm a little stumped.
This is the document that I used for reference:
http://kb.fortinet.com/kb/documentLink.do?externalID=FD36460I configured the Netflow collector IP, enabled Netflow on the interface and verified that the collector IP is in the correct rule.
When I do a diag sys tcpsock, I don't see any connection from the firewall going to the collector IP.
Am I missing something?
-----End Original Message-----